Search

Help

Log in

Forum

Events

Gallery

Clubs

You are here: Forum Index -> Textiles, Garb and Jewelery
Patterns
Goto page 1, 2  Next
 
Post new topic   Reply to topic     View previous topic :: View next topic  
 
Author Message
Keeghan_M



Location: Wellington

PostPosted: Thu Jan 15, 2009 8:29 pm     Patterns Reply with quote

Does anyone have any links or know somewhere i could find some Norse shoe patterns and Norse apron dress patterns

Also, if i wished to be making these while at camps would i have to use bone needles? or could i use modern metal ones? if i needed to use bone ones where could i get them from?
merrynsmoor



Location: Upper Hutt

PostPosted: Thu Jan 15, 2009 9:34 pm      Reply with quote

I found that this was a good apron dress pattern:

http://www.silverdor.org/viking/vikingad.html

This one has heaps of good links as well:

http://www.vikinganswerlady.com/clothing.shtml

I don't have anything on viking shoes sorry. I took the easy way and bought some Embarassed

I think it would be fantastic if you make your gear at camp using bone needles! But I don't think I've ever been to a camp where I've been told to put my modern metal needles away! Smile So I wouldn't worry too much about that. Generally, even at the most authentic camps, you can hide your plastic cotton reel etc under something while you work on your project. Medieval

_________________
And forget not that the earth delights to feel your bare feet and the wind longs to play with your hair - Kahlil Gibran
Keeghan_M



Location: Wellington

PostPosted: Thu Jan 15, 2009 10:06 pm      Reply with quote

thanks Krystal

that first link looks really good, ill get my mum to have a look. And that second one seems to have lots of interesting info on lots of other things to so ill take a look at that some time as well. According to mum wellbex said shed made her own shoes, so unless she posts here before next week ill talk to her about that next training.

In that case then, ill use normal metal ones unless i stumble upon some bone ones somewhere, if i do ill use them. Maybe someone will be selling them at Taupo, if so ill buy them there, but ill take my metal ones in case.

Thanks again for your help.
Keeghan
amuckart



Location: Wellington

PostPosted: Thu Jan 15, 2009 10:37 pm      Reply with quote

Where are you based? If you're in Wellington I can help with shoe patterns but it's a bit harder remotely.

Start by looking at Marc Carlson's site Footwear of the Middle Ages

Specifically have a look at the following:

Be aware that you can not just blow up the line drawings on Marc's site and get something that will work. They are not to scale and are intended only to show the shape of the cutting pattern, you'll have to generate a cutting pattern to fit your own foot.

With shoes the important thing is to understand the shape and how they go together. If you wrap your head around that, you can make a pattern that will fit your foot. Off-the-shelf shoe patterns rarely fit propery.

I wouldn't try using bone needles for shoemaking, they'd break in no time. For medieval shoes, boar bristles braided onto the end of hand-plied and waxed thread is what was most likely used; for earlier period shoes nobody really knows, but copper-alloy needles aren't out of the question.

_________________
Al Muckart. Shoe geek.
http://wherearetheelves.blogspot.com
Keeghan_M



Location: Wellington

PostPosted: Thu Jan 15, 2009 10:45 pm      Reply with quote

I am based in wellington. So dont use bone needles for shoes, what about using modern metal ones, or are they to thin and to easy to snap?
BigMac




PostPosted: Fri Jan 16, 2009 12:47 am      Reply with quote

mad_computer_user wrote:
I am based in wellington. So dont use bone needles for shoes, what about using modern metal ones, or are they to thin and to easy to snap?


There are leather working needles and/or awls that you can buy.

TTFN

_________________
There is a fine line between Hobby and Insanity
Wellybex



Location: Wellington

PostPosted: Fri Jan 16, 2009 7:50 am      Reply with quote

Quote:
I found that this was a good apron dress pattern:

http://www.silverdor.org/viking/vikingad.html


Hi Keeghan

Tell your Mum the above pattern is for the same dress I was wearing on Tuesday night that I discussed with her. I will still bring along the information on it and if she wants me to go over the pattern with her (as I think this is quite a difficult pattern) I am happy to on Tuesday.

She will also need a pattern for the dress that goes under it but if you browse through the other site Krystal posted you should find a basic tunic/dress pattern. I will bring information on this one to training on Tuesday as well.

Wellybex

_________________
“You've been chasing me your entire life, only to fail now. I think that's the worst thing I've ever heard; how marvellous.”
Keeghan_M



Location: Wellington

PostPosted: Fri Jan 16, 2009 8:05 am      Reply with quote

ok, ill tell her once shes up lol
amuckart



Location: Wellington

PostPosted: Fri Jan 16, 2009 9:01 am      Reply with quote

The needles you want are "harness needles". Start with sizes 4-6 (those are at the smaller end of the scale), and go up from there if you need to. I don't think I've ever used anything bigger than a 3 or so, but I don't sew with needles much any more because I use hand plied waxed thread and bristles.

You'll also need an awl. Most people use diamond-shaped alws, but round ones with a sort of chisel point are better. I make my own out of old allen keys because round ones are so hard to find.

Awl handles and blades tend to get sold separately, so you'll need a handle too. The cheapo small file handles from the hardware store work Ok for occasional use.

Thread is the other problem. Stay right away from prewaxed polyester. It's horrible stuff to work with. It cuts leather (and hands) like cheese wire. Prewaxed linen is Ok, but sorta hard to find - a lot of what is sold as linen is actually linen-colored polyester.

I haven't found anywhere convenient to get this stuff retail in Wellington. If you know of a well stocked saddler you could ask them, otherwise ring Lapco in Christchurch. Their website is www.lapco.co.nz. They have tools and needles on there but their website is a bit of a pain to navigate.

If you can wait until mid February when I'm no longer panicking about Canterbury Faire, send me a PM or an email and I'll see if I can give you a hand to get started.

_________________
Al Muckart. Shoe geek.
http://wherearetheelves.blogspot.com
Keeghan_M



Location: Wellington

PostPosted: Fri Jan 16, 2009 9:40 am      Reply with quote

ok, thanks ill take a look at that. Wellybex, mum would like to have a look at the information you have for the dress underneath and anything else you have. Shes also wondering what colours and fabric are authentic to use. My tunic is red and linen, and i know they are acceptable, what other colours are there? browns, reds, blues i know are ok, and linen and wool, but no idea on others.
Wellybex



Location: Wellington

PostPosted: Fri Jan 16, 2009 11:10 am      Reply with quote

I am at work so I don't have the link for the colour wheel which shows what colours you can use as they can be made using natural dyes that the Norse would have used. Does anyone else have that link handy?

Linen, raw silk and wool are your best bet. I can bring some samples of the types you should be looking for on Tuesday as well. I have found that buying a woollen blanket from an opshop is a cheap way of doing it and a lot of my wool has come from the fabric remnants at opshops as well. Trade me is also very good for bargains too. I can have a look at what fabrics I have at home too and bring them along to training Smile

And I have also found that buying a cotton-linen blend that looks like linen is cheaper but that depends on what level of authenticity you are going for.

I find if you are using a woollen blanket, you have to be careful with dying it so it's best to buy ones in the colour you want to use and sometimes thats a bit hard. I will keep an eye out for those as well Smile

_________________
“You've been chasing me your entire life, only to fail now. I think that's the worst thing I've ever heard; how marvellous.”
griff



Location: Auckland

PostPosted: Fri Jan 16, 2009 11:17 am      Reply with quote

colour wheel


COLOUR_WHEEL.gif
 Description:
 Filesize:  193.02 KB
 Viewed:  29581 Time(s)

COLOUR_WHEEL.gif


Wellybex



Location: Wellington

PostPosted: Fri Jan 16, 2009 11:47 am      Reply with quote

Awesome thanks - thats better than the one I had!!
_________________
“You've been chasing me your entire life, only to fail now. I think that's the worst thing I've ever heard; how marvellous.”
Keeghan_M



Location: Wellington

PostPosted: Fri Jan 16, 2009 1:43 pm      Reply with quote

awesome, thats brilliant ill show that to my mum. Thanks everyone for your help, this is such a great community Smile
wuzzle



Location: levin

PostPosted: Fri Jan 30, 2009 11:54 am      Reply with quote

amuckart wrote:
The needles you want are "harness needles". Start with sizes 4-6 (those are at the smaller end of the scale), and go up from there if you need to. I don't think I've ever used anything bigger than a 3 or so, but I don't sew with needles much any more because I use hand plied waxed thread and bristles.

You'll also need an awl. Most people use diamond-shaped alws, but round ones with a sort of chisel point are better. I make my own out of old allen keys because round ones are so hard to find.

Awl handles and blades tend to get sold separately, so you'll need a handle too. The cheapo small file handles from the hardware store work Ok for occasional use.

Thread is the other problem. Stay right away from prewaxed polyester. It's horrible stuff to work with. It cuts leather (and hands) like cheese wire. Prewaxed linen is Ok, but sorta hard to find - a lot of what is sold as linen is actually linen-colored polyester.

I haven't found anywhere convenient to get this stuff retail in Wellington. If you know of a well stocked saddler you could ask them, otherwise ring Lapco in Christchurch. Their website is www.lapco.co.nz. They have tools and needles on there but their website is a bit of a pain to navigate.

If you can wait until mid February when I'm no longer panicking about Canterbury Faire, send me a PM or an email and I'll see if I can give you a hand to get started.


Hi all I thought I would jump in at this point
have got several grades of irish made thread
made from proper linen X upolstery manufacture

also pester jeremy (dawson) at taupo if you get
this thread on time before taupo as he is one
of the few shoe/boot GURUS we have in our
community

as far as I know much leather work of period
origen was "pre holed" prior to stitching
later moving to "flesh stitching" only after
metal needles were developed
Rgds WUZZLE

_________________
Float Sink or Swim as Yee please but Know you are always watched for even in the
masses is clarity obtained by your Betters
and no one of Upwright Character fooled
Display posts from previous:   
Post new topic   Reply to topic    Back to top Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  


Powered by phpBB © 2001, 2005 phpBB Group Please read the terms of use Contact the Site Admin
Your donations help keep this site ad-free